|
Post by deeredevil on Aug 30, 2011 8:58:04 GMT -5
|
|
|
Post by mstjhamfarms on Aug 30, 2011 9:12:37 GMT -5
Once again beautiful work!!!
Couple of questions:
- What are you using to strip off the paint? - Did you custom cast the wheels/hubs or are you machining down tubing or Standi band rims?
Thanks...Hambone
|
|
|
Post by bu on Aug 30, 2011 11:10:31 GMT -5
that's awesome! beautiful work is right... great work and really nice pictures your implements are really nice too
|
|
|
Post by deeredevil on Aug 30, 2011 11:22:57 GMT -5
I use Klean Strip Paint stripper from Wal-MArt $6 a can The dual wheels are some of my casted wheels I sell. the Wil-rich chisel plow was made by Jacob Larson and the Wishek Disk was made by Jeremy Kinsman. I also have decals for sale.
|
|
|
Post by ManitobanFarmerKid on Aug 30, 2011 13:18:44 GMT -5
That looks incredible!! The only thing I see is that it looks like you made it into a quad-shift/standard tranny which isn't an option for 9530 and 9630 tractors. Other than that amazing work!!!
|
|
|
Post by deeredevil on Aug 30, 2011 14:16:17 GMT -5
power shifts levers aren't even worth adding as far as detail. Power Quads look cooler and give off more detail. regardless of what the brochure says some 9530 and 9630s were ordered with power quads. Seen them at few Texas dealers. Not sure why they were ordered that way but some were a special order for a wheat and cotton farmer.
|
|
|
Post by Quinton DeDecker on Aug 30, 2011 14:55:50 GMT -5
nice tractor, do u sell the tires u make??
|
|
|
Post by deeredevil on Aug 30, 2011 15:08:58 GMT -5
I sell the rims only no tires
|
|
|
Post by CDC on Aug 30, 2011 15:41:19 GMT -5
power shifts levers aren't even worth adding as far as detail. Power Quads look cooler and give off more detail. regardless of what the brochure says some 9530 and 9630s were ordered with power quads. Seen them at few Texas dealers. Not sure why they were ordered that way but some were a special order for a wheat and cotton farmer. power shift meaning gears I RAN A DEMO 9630 LIKE THAT
|
|
|
Post by mstjhamfarms on Aug 30, 2011 18:54:21 GMT -5
Thanks Deeredevil for the feedback. I will try that paint stripper sometime.
I know you posted some of your kits awhile back. Would you mind reposting an updated list of your offerings in the For Sale section of this website?
Thanks...
|
|
|
Post by AgriKing on Aug 30, 2011 19:37:27 GMT -5
Wow! U re-invented that ertl 4wd!
|
|
|
Post by CDC on Aug 30, 2011 20:25:43 GMT -5
how do u take apart the front? do u drill out the rivet
|
|
|
Post by deeredevil on Aug 30, 2011 20:27:14 GMT -5
Posted a list in the For Sale Forum of current parts and kits I sell. I also have some 1/16 IH dress up parts, but no need to waste my time posting them on a 64th dominant board.
To take the front apart you have to pop off the cap and its a screw behind it.
|
|
njenn
New Member
Posts: 8
|
Post by njenn on Aug 31, 2011 7:01:36 GMT -5
Where can you get tires like these? Im having a hard time finding a place. Thanks
|
|
|
Post by CDC on Aug 31, 2011 18:07:57 GMT -5
Posted a list in the For Sale Forum of current parts and kits I sell. I also have some 1/16 IH dress up parts, but no need to waste my time posting them on a 64th dominant board. To take the front apart you have to pop off the cap and its a screw behind it. i ment split the casing
|
|
|
Post by snoose2727 on Sept 12, 2011 2:26:20 GMT -5
sweet All I would add is wheel weights
|
|
|
Post by deeredevil on Sept 12, 2011 9:21:34 GMT -5
Instead of adding the wheel weights I went with the slab weights over the rear end. Its an option but not as common as wheel weights. If I do a 9630 with 800 firestons I'm gonna add wheels weights to it to keep them form looking to similar. I'd still like to do a 9430, 9330 and 9230 as well.
|
|
|
Post by jacoblarson on Sept 12, 2011 22:03:34 GMT -5
How did I miss this?
Looks great! Even the small changes to the back section and hitch area made a huge difference!
|
|
|
Post by woltersfarm on Oct 24, 2011 21:16:14 GMT -5
Beautiful work brian
|
|
|
Post by 9870stsbulletrotor on Nov 6, 2011 22:52:08 GMT -5
Nice work on that 9630.
Iowa Park Texas huh? I'm not to far from ya.
|
|