|
Post by Tim Carlson on Feb 25, 2010 19:08:41 GMT -5
This is a 8520 and I call it the Black Beauty. I am not compleatly finished yet. Any one have any ideas how to make weight to go on the front? Any way I made the roll cage from scratch( Not the prettiest) and painted the whole thing black. Left the ladder and front axal green. It made it look pretty. [img src="[/img] i950.photobucket.com/albums/ad348/JD8345r/DSCN2539.jpg"] I also drilled a hole in the hood and put the stack in the middle. Might be alittle big. Oh well I like em big. Driver is not going to be able to see where he is going with that stack in the way HAHA Next is a F-250 Puller. I made a better looking small lift to fit the big tires on it. Made custom cab lights, and put a tonnua cover over the bed. Drilled a hole in the hood for the stack. I kinda tore up the black plastic window insert so I had to leave it open. I dont think it looks that bad. Does it?? Stack is a bit big for this also. Oh Well. This side got alittle scratch sometime when I was putting it back together. I will have to fix later Well here they all are . What do you all thing. All Comments are welcome as well as questions
|
|
|
Post by rysiracusa on Feb 27, 2010 12:11:40 GMT -5
Very nice job. You might want to grind down the rear rubber on the tractor...that'll get you disqualified hahaha
Keep it up man!
|
|
|
Post by Tim Carlson on Mar 6, 2010 22:40:15 GMT -5
yea. Its the only rear wheels i had tht would look good on it so I had to use it.
|
|
|
Post by hoss on Mar 7, 2010 19:51:08 GMT -5
i like the f 250 it dont look bad without the black windows think it looks alot better w/out them
|
|
|
Post by Tim Carlson on Mar 8, 2010 23:10:01 GMT -5
Thanks. I actually broke the black windows trying to pull it out
|
|
|
Post by foxrider91 on Mar 18, 2010 10:26:45 GMT -5
i like the f 250...how did u lift it???
|
|
|
Post by Ricky Boyce on Mar 18, 2010 14:50:21 GMT -5
I think people saw that you want to know how to lift a truck just post it onece people read it you don't have to post it in every section.
|
|
|
Post by Tim Carlson on Mar 18, 2010 15:45:16 GMT -5
i like the f 250...how did u lift it??? Well if you look at the front of the F250 you will see a small chrome tube. All I did was grind down where the axals originaly went and cut a small piece of styrene and glued it to it. I then cut a small piece of tubing which you can see and glued it to the styrene. Put you wheels and axal back on and it should be lifted more than the original. If you want it higher just add more styrene spacers befor you glue the tubing on.
|
|