|
Post by hamboyz06 on Sept 22, 2010 21:42:13 GMT -5
1st & 2nd Generations of custom made header carts Loaded up and ready to go 2nd attempt @ making a combine trailer......narrower & shorter Same trailer, but with different goodies Customized spray trailer....gonna add more accessories later My take on a Balzer.......The Ham-Zer Instead of 1 big auger, 2 smaller augers Finished product.....if this gets stuck.....call the National Guard
|
|
|
Post by 70ds on Sept 22, 2010 22:08:43 GMT -5
Nice work. That is a neat graincart idea.
|
|
|
Post by steiger9330 on Sept 23, 2010 15:04:15 GMT -5
Nice customs. Picture clarity is good. Cool grain cart.
|
|
John K.
Full Member
Respect the Eagle
Posts: 270
|
Post by John K. on Sept 23, 2010 15:14:47 GMT -5
Those are purdy nice. Whereabouts in SD are you? I live about a half hour north of the Black Hills.
|
|
|
Post by ManitobanFarmerKid on Sept 23, 2010 16:45:40 GMT -5
Like the grain cart man! Also like the CR.
|
|
|
Post by hamboyz06 on Sept 23, 2010 17:30:11 GMT -5
John K.......my brother and I live in Sioux Falls......grew up in Bowdle
|
|
|
Post by ihdriver on Sept 23, 2010 20:47:25 GMT -5
The graincart is really different but awsome. Did you use 2 J&M grain cart or what?
The header trailer or cool too. What did you make them out of. I have been tryin to make a J&M out of keystock. Does the front axel rotate?
|
|
|
Post by hamboyz06 on Sept 23, 2010 21:01:18 GMT -5
Graincart is actually 2 of the Collect-N-Play graincarts from Tractor Supply or Runnings butted together and then built off of that. JB Weld, dremel, and patience too. The header carts, I took 1 of the Collect-N-Play carts and cut it in half, and mounted it to some copper square tubing. The hitch articulates and everything. Anymore questions, let me know, I can send you some, more detailed pictures.
|
|
|
Post by ihdriver on Sept 23, 2010 21:14:18 GMT -5
Thank bud. I was goin to try to make a header trailer like that and notice the wheel holers on the wagon was bent inward. Well moral of the story is that that is some weak metal. Can I get a bottom veiw of that trailer?
Them collect and play grain cart has the unmovable auger. wonder if we could make one that would hing?
|
|
|
Post by ManitobanFarmerKid on Sept 23, 2010 21:14:49 GMT -5
Nice is that cart based off one you owned or just a pic off the internet.
|
|
|
Post by hamboyz06 on Sept 23, 2010 22:41:39 GMT -5
ihdriver- I just cut the augers off the carts, you could refabricate one and put that on their since the original was cast odd farmer1996-I just tried putting the two carts together, then later seen a Balzer cart @ a Cat dealership and kinda made my own spinoff......the balzers have one big "cannon" like auger in the front, and one single tank......where as mine can clearly be identified as 2 tanks...... Anymore questions or pics, let me know
|
|
|
Post by hamboyz06 on Sept 24, 2010 17:12:36 GMT -5
Today's project: Took loader off 1270, put it on 1570 Gonna turn the 1270 into a ProFarm Puller for the local fairs
|
|
|
Post by hamboyz06 on Sept 24, 2010 17:31:23 GMT -5
|
|
|
Post by steiger9330 on Sept 24, 2010 21:38:40 GMT -5
I see you used some collect and play pieces on that header wagon. Great source of inexpensive parts.
|
|
|
Post by texastyle71 on Sept 25, 2010 8:30:08 GMT -5
great work!!!
|
|
|
Post by hamboyz06 on Sept 26, 2010 12:23:09 GMT -5
I try to run a somewhat of a budget minded operation, so I'll recycle and reuse as much as I can
|
|