|
Post by sean on Mar 17, 2009 20:35:30 GMT -5
Ok guys, Iposted these in the "on the workbench" forum, and everyone said change the ROPs, so I did here are the final pics........ MX120, with no cab, w. ROPs MXU120, took the cab off, added ROPs, and forks on the bucket, I need to clean out the bucket for final pics, alittle dusty. JD 6400-series, again, took the cab off and added ROPs. The ROPs and bucket forks are scratch built. Comments and Q's are appreciated. Sean
|
|
|
Post by shawntelaak on Mar 17, 2009 20:48:14 GMT -5
Those look a lot better now. Good job on them Sean.
|
|
|
Post by mikes on Mar 17, 2009 21:26:36 GMT -5
Only suggestion is on the 6420, take a dremel to the nubs from the old cab posts... will give it a much cleaner look
|
|
|
Post by sean on Mar 18, 2009 6:08:24 GMT -5
Thanks guys, I took a look at the JD, thats the only cab post that is still part visible, I will have to take it down the dremel here tonight.
Sean
|
|
|
Post by mikes on Mar 18, 2009 16:48:08 GMT -5
And just because I'm me , on the right side of the 6420 there is still a bit of black plastic from the old exhaust... I suggest taking needle nose pliars and gently pry them out, or you could exacto knife them out. Good job.
|
|
|
Post by sean on Mar 18, 2009 18:26:39 GMT -5
I guess there is a reason why I dont like JDs.........................lol
Sean
|
|
|
Post by prodriver on Mar 18, 2009 20:14:53 GMT -5
On the JD you mite want to paint the seat yellow. On the real ones they are yellow for open cabs.
|
|
|
Post by 774630 on Mar 18, 2009 22:37:24 GMT -5
those look great, those differant ROPS look real good.
|
|
|
Post by rysiracusa on Mar 23, 2009 17:52:04 GMT -5
Very nice tractors. The 100 looks like Mr. Telaak's JX95 Dont you think Shawn? Keep up the good work
|
|
|
Post by baker2 on May 9, 2009 11:48:21 GMT -5
How did you make the forks that r on your bucket?
|
|