farms
Junior Member
My New Website Is http://littletoytractor.webs.com/
Posts: 232 
|
Post by farms on Feb 11, 2015 23:08:46 GMT -5
For build the v8 pulling tractor I plan on using a john Deere 4520 is there ia way I can cut out the engine or should I just cut out the hood grill and engine and leave the dash tower and frame were the engine and hood went and then install the v8 and put a hood I cut off of a john Deere articulated on it?
|
|
farms
Junior Member
My New Website Is http://littletoytractor.webs.com/
Posts: 232
|
Post by farms on Feb 12, 2015 17:17:39 GMT -5
What would be the easiest way to go and what way would look nice though?
|
|
farms
Junior Member
My New Website Is http://littletoytractor.webs.com/
Posts: 232
|
Post by farms on Feb 12, 2015 17:43:03 GMT -5
All opinions are welcome?
|
|
|
|
Post by Tony Dixon on Feb 12, 2015 18:19:36 GMT -5
What style v8 you going for, I built a couple kinze style 5020's using standi v8 kits which just required filling and drilling   |
|
farms
Junior Member
My New Website Is http://littletoytractor.webs.com/
Posts: 232
|
Post by farms on Feb 12, 2015 20:57:21 GMT -5
What style v8 you going for, I built a couple kinze style 5020's using standi v8 kits which just required filling and drilling Im going for a v8 gas engine carburated. |
|
|
|
Post by Tony Dixon on Feb 12, 2015 22:16:26 GMT -5
Not quite carberated but........   |
|
farms
Junior Member
My New Website Is http://littletoytractor.webs.com/
Posts: 232
|
Post by farms on Feb 13, 2015 12:56:08 GMT -5
Not quite carberated but........ Like what you have in the 756 is what i want to do. |
|
|
|
Post by Tony Dixon on Feb 13, 2015 18:37:45 GMT -5
Hemi.... I found mine on e-bay resin cast, split the tractor and dremeled out the original engine.
|
|
farms
Junior Member
My New Website Is http://littletoytractor.webs.com/
Posts: 232
|
Post by farms on Feb 14, 2015 18:22:50 GMT -5
Oky thanks
|
|
