|
|
Post by mnjosh on Jun 29, 2009 23:46:08 GMT -5
I went through Zeigler Cat's lot on Sunday looking to see if they had any new 600C series there. They did and a few other C series tractors too. That 600C looks like a heck of a tractor. MT 645C   MT 764C   MT 865C  MT 965C  MT 500B series with haybine and baler    I went through our John Deere dealer's lot also and found a Case IH MX 200 2WD.  Hope you enjoy the pictures. |
|
|
|
Post by sean on Jun 29, 2009 23:55:52 GMT -5
The 600C series is a heck of a tractor........gotta think its almost identical to the MF 8600 series, and the 8690 is biggest tractor (thats not 4wd) on the market today. Agco has really improved in the last year or 2............gotta think that Agco has the biggest combine on the market, MF 9895.......(dont know the Gleaner model) My grandpa's work just got a 9795 in, this thing is HUGE!!!!! I have pics I will post some point.
Sean
|
|
|
|
Post by mikes on Jun 30, 2009 8:38:01 GMT -5
That CASE 2WD looks so much better than the front end of the new challengers... they made them too "euro"...
|
|
|
|
Post by sean on Jun 30, 2009 9:01:36 GMT -5
I think Europe designed this model of Agco/Challengers/MF tractors..........but they are all the tractors sold here are made in America unless shipped from overseas.
Sean
|
|
|
|
Post by mikes on Jun 30, 2009 10:27:48 GMT -5
Well the MT645C was made in france  I think alot of the challengers are, get on tractor data some time, it has the factories listed... |
|
|
|
Post by Tomas D. on Jun 30, 2009 15:05:02 GMT -5
the MT 764C sure has narrow tracks
|
|
|
|
Post by mnjosh on Jun 30, 2009 18:54:20 GMT -5
The 600C series is a heck of a tractor........gotta think its almost identical to the MF 8600 series, and the 8690 is biggest tractor (thats not 4wd) on the market today. Agco has really improved in the last year or 2............gotta think that Agco has the biggest combine on the market, MF 9895.......(dont know the Gleaner model) My grandpa's work just got a 9795 in, this thing is HUGE!!!!! I have pics I will post some point. Sean MF 8600, AGCO DT-B, and Challenger 600C series are all common platform. The Challenger series cab is very much like the other Challengers series where the MF and AGCO controls are alike. MF 9895/Gleaner A 86 aren't the biggest, but are still very big. And yes, please share pics of the 9795. |
|
I think alot of the challengers are, get on tractor data some time, it has the factories listed...
