|
|
Post by Southern on Apr 12, 2011 16:44:44 GMT -5
Saw these are out now. So you can add them to your collection.
JD 720 narrow with wagon
JD 3010 narrow with wagon
JD 4755 with fwa and rear duals
JD 1010 Special
I might pick up the 720 with narrow front. But not sure. I know I will pick up the 4755.
|
|
|
|
Post by steiger9330 on Apr 12, 2011 16:55:01 GMT -5
I might get a 4755 this fall. I can't wait till the IH stuff comes out.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 12, 2011 17:12:09 GMT -5
4755 has actually been out for about a month or so. Its great I love it.
Ive got a guy that orders all new IH stuff when it comes out and hes giving me calls when stuff comes in so ill have it all first thing haha.
|
|
|
|
Post by Southern on Apr 12, 2011 18:10:02 GMT -5
I wasn't fully sure how long it was out. I just noticed the 3010 and 720 and went down and saw that too. The 4755 is really nice. I want to add him to my collection. I have a 720 Wide Front, so that is why I'm not sure on the narrow one. The 3010 I have already from the 10 series set.
I don't have much Case NewHolland stuff on my list. Didn't see much I wanted. I only got the New Holland round baler, IH 1466, CIH 450, and new Dodge with CIH tractor. I hope that Dodge truck don't have darn CIH markings on it. I hate dealer/brand trucks. I can't use them for a personal/farm truck. And my painting skills is not good enough to repaint a good coat like a real truck has.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 12, 2011 18:36:22 GMT -5
I bet since it comes with a tractor it does. My only fear is that I just caught wind that there is some johnny lightning dodge ram being released as ertl and I sure hope that isnt the one that is released with the tractor because that totally ruins my plans and the hope for that cast I posted a long time ago of an ertl 4th gen.
|
|
|
|
Post by Southern on Apr 12, 2011 19:15:23 GMT -5
That is what I'm thinking, it will have CIH markings. If it does, count me out. I won't buy it. Semis I can kinda understand and use, but even then I'm starting not to use them. But not vehicles I can use as a personal vehicle. No one out there wants that all over their stuff. Like a new Ford pickup with John Deere all over it, or some Chevy impala car with Massey on it. Who would drive that?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 12, 2011 19:33:11 GMT -5
you can remove the labels alot of times with nail polis remover. I dont typically cuz the stuff I got is super strong.
|
|
|
|
Post by steiger9330 on Apr 12, 2011 21:14:58 GMT -5
That is what I'm thinking, it will have CIH markings. If it does, count me out. I won't buy it. Semis I can kinda understand and use, but even then I'm starting not to use them. But not vehicles I can use as a personal vehicle. No one out there wants that all over their stuff. Like a new Ford pickup with John Deere all over it, or some Chevy impala car with Massey on it. Who would drive that? That's the main reason I started scratch building everything. I was fed up with the ertl stuff and I couldn't use it. I'll probably get the dodge set to get the 180, but then again I was considering just scratch building one lol. I need to customize a newer mag b/c my dad has been hinting about replacing our 7110 with a 210 in the future (probably a few years). |
|
|
|
Post by Southern on Apr 12, 2011 21:19:17 GMT -5
That is what I'm thinking, it will have CIH markings. If it does, count me out. I won't buy it. Semis I can kinda understand and use, but even then I'm starting not to use them. But not vehicles I can use as a personal vehicle. No one out there wants that all over their stuff. Like a new Ford pickup with John Deere all over it, or some Chevy impala car with Massey on it. Who would drive that? That's the main reason I started scratch building everything. I was fed up with the ertl stuff and I couldn't use it. I'll probably get the dodge set to get the 180, but then again I was considering just scratch building one lol. I need to customize a newer mag b/c my dad has been hinting about replacing our 7110 with a 210 in the future (probably a few years). I was mainly after the truck. Since I like to add more pickups to my collection and possible use. I have a good many trucks, but can't use them. Due to being labeled with brand markings. Ertl is bad about that, and I despise them doing that. Ruins a good car or truck you could use on a display. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 12, 2011 21:49:18 GMT -5
i cant wait for the new round balers coming out
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 13, 2011 6:26:11 GMT -5
That's the main reason I started scratch building everything. I was fed up with the ertl stuff and I couldn't use it. I'll probably get the dodge set to get the 180, but then again I was considering just scratch building one lol. I need to customize a newer mag b/c my dad has been hinting about replacing our 7110 with a 210 in the future (probably a few years). I was mainly after the truck. Since I like to add more pickups to my collection and possible use. I have a good many trucks, but can't use them. Due to being labeled with brand markings. Ertl is bad about that, and I despise them doing that. Ruins a good car or truck you could use on a display. If they used stickers again that would be amazing. Ive ripped em off some of the old trucks and they are great without em. That wont happen but oh well. They also need to quit with these stupid sets as well. Im tired of wanting a dodge but gettin a stupid horse trailer or something else with it. I WANT THE TRUCK! LOL |
|
|
|
Post by case2590 on Apr 13, 2011 8:59:09 GMT -5
The best bet is to use a cotton ball and some acetone. Basically the same thing as nail polish remover, just a little better at stuff like this. I got rid of the decals on my nh big baler that way. Just lightly rub the paint and the outer decals will come off. The clear coat on the base should protect it. If it is a sticker decal, just peel most of the top of the sticker off and do the same, the adhesive will come right off leaving the base showing through, that's what I did.
|
|
|
|
Post by AgriKing on Apr 13, 2011 9:11:28 GMT -5
I'm only getting the 4755. John Deere 1/64 Releases don't interest me much anymore. About everything JD has been made. Case/IH still has alot of stuff that hasnt been made yet, for example; Case 94 Series 4wd's. Im keeping my fingers crosses for one in the next few years.
|
|
|
|
Post by Southern on Apr 13, 2011 19:20:32 GMT -5
My collecting is slowing down in both scales. My 16th is full I don't have room for more unless I really want something. My 64th is pretty much done. Expect a few I still like to see made and will always room for them. But here lately my taste on collecting in 64th is going more vintage. As these new Irons really don't get my attention like they used to. Some has to do with their new styling, which I don't like too well. Plus I'm more of a raw power person where you used engine to make horses. Not computer boxes and sensors.
|
|
