|
|
Post by steiger9330 on May 4, 2011 20:12:02 GMT -5
|
|
|
|
Post by farmboy64 on May 4, 2011 20:31:52 GMT -5
how did you make that shuttle on the trailer? the trailer is nice, good work
|
|
|
|
Post by steiger9330 on May 4, 2011 20:36:38 GMT -5
The shuttle is made of posterboard. I just cut out two circles and made a cylinder and added the legs. I then added misc. details. They are supposed to represent the 2 Satellite 110 tanks we used to use for roundup when I was growing up.
|
|
|
|
Post by djt14 on May 4, 2011 20:56:52 GMT -5
Good job Dan and all i got it some minor details so it should be up tonite if photobucket doesnt get goofy with me. To be honest i think yours won lol.
Dallas
|
|
|
|
Post by steiger9330 on May 4, 2011 20:58:09 GMT -5
I was hoping you would have yours done. I look forward to seeing it tomorrow morning before I go to school.
|
|
|
|
Post by djt14 on May 4, 2011 20:59:55 GMT -5
Im going to work on it now and do your jacks move?
|
|
|
|
Post by steiger9330 on May 4, 2011 21:04:20 GMT -5
Yes they move, but in real life we just set a block under the trailer because it was so low to the ground that we bottomed out sometimes and the jacks weren't regular jacks. They just had pins that you took out and moved them down, so we just stopped, put down some boards and blocks, and then we dumped the air ride in the tractor to lower the trailer.
|
|
|
|
Post by djt14 on May 4, 2011 22:11:21 GMT -5
Got a bit out of control with the dremel and caused more work for my self so im guessing if i can work late on it tonite it will be done and pics up tonite. I accidentally cut the back end off but after that its just boxes that i may be able to paint tonite. The absolute latest it will be done is friday. If thats not ok then just cancell the build off i think i already lost it lol.
Sorry about the delay
Dallas
|
|
|
|
Post by steiger9330 on May 5, 2011 6:20:26 GMT -5
lol Don't worry about it Dallas. You can just say it was faulty welds or something lol Just post it when you get it done.
|
|
|
|
Post by djt14 on May 5, 2011 8:45:55 GMT -5
lol. When i put my wood on i did it a total wrong way then when i wanted to make it sit lower i had to cut out part of the side for the wheels to sit and where the wood ended it wasnt glued proper to the back of the trailer and i ended up cutting quite a bit off. A little hot glue won't fix that tho lol
|
|
