|
|
Post by rcfarms82 on Sept 7, 2012 20:13:03 GMT -5
This is my first picture post so bare with me trying to get it right.. I done this model a while back and would still definatly need paint and decals but I started with two well played with tractors so if i messed up it was no biggie. I've always wanted to build a 6410 with cab as thats what I use alot on the farm and was my late grandfathers. I started with a 6200 and a 7200 deere. I took the cab off the 7200 and grafted it onto the 6200, after some carefull grinding and fitting i got it pretty well where i wanted it. Now when I do the next one I'll no exactly where to go on this project. If I don't build another I will definatly repaint and re-decal this model and add an allied loader and remove the weights, add 3 point and maybe cab glass.. Just something a lttle different I thought..  |
|
|
|
Post by lane1486 on Sept 8, 2012 19:54:35 GMT -5
i say make it a loader tractor!!!
|
|
|
|
Post by rcfarms82 on Sept 8, 2012 20:20:36 GMT -5
That was the original idea. The one we have has an Allied loader, its more or less just a mock up model at this point. More to come for sure!!
|
|
|
|
Post by lane1486 on Sept 8, 2012 22:11:17 GMT -5
sounds good i am excited if u do make i more i would buy the proto type!!!
|
|
|
|
Post by nctobfarmer on Sept 10, 2012 18:23:35 GMT -5
That looks really good. When you cut the cab of the 7800 did you cut it at the posts, or under the fenders? It's hard to tell from the photo.
|
|
|
|
Post by rcfarms82 on Sept 11, 2012 10:30:55 GMT -5
Under the fenders mainly but had to trim the front cross beam of the cab, grind some, test fit and repeat.. Had to grind some off the 6200 frame as well. Really wasn't that hard at all.. Still wanting to make another with better paint though..Thanks..
|
|
