First time customizing

[kolten]

Hey guys can anyone help me out or give me a tutorial on what i need to do to add duals to a combine or tractor.Looking to add duals to my 7720 titan 2.

Thanks,
Kolten

[nctobfarmer]

First, pull off the existing tires or drill out the rivet on the existing tractor axle. The factory axles are either 3/32 or 1/8 inch thick. If you want to use friction to hold the duals on, you will need to use 1/8 inch rod for the "new" axle. You can pick up 1/8 welding rod at any hardware store and cut it to the appropriate length. So, drill out the frame to 1/8 inch, insert the rod through the frame, then force the "new" tires onto the axle. They usually have a 3/32 hole, so this is enough to hold them on without any glue or rivets.

Several sites sell kits including Daryl's Toy Barn on Ebay, Moore's Farm Toys, and Bossen Implement. I have made spacer duals just the way I described above, and will be ordering some from Daryl's shortly to customize a White 2-135 I just received.

[kolten]

Thanks alot !!!